Water Tight Technologies

  RUBBERALL® Family of Products
  RUBBERALL® Membrane Qualities
 
  Warranty
  Installation Manual
  Installation Video Guide

 

 

See Printer-Friendly Version
Download PDF File

MATERIAL SAFETY DATA SHEET

May be used to comply with OSHA's Hazard Communication Standard, 29CFR 1910.1200.

SECTION 1 - PRODUCT IDENTIFICATION

Product Name:
White EPDM Membrane (Bi-Laminate)

24-Hour Emergency Telephone Number:
800-424-9300 CHEMTREC

Chemical Name/Synonyms:
N/A

Manufacturer's Name:
Water Tight Technologies, LLC

Chemical Family:
Mixture

Manufacturer's Address:
P.O. Box 899 Payson, AZ  85547

Chemical Formula:
N/A

NFPA Acute Hazard Rating:
Not Established


SECTION 2 - CHEMICAL COMPOSITION

Ingredient Components (chemical names)

OSHA (1910. 1200)

Case No.

% wt or % vol

OSHA STEL

OSHA PEL

ACGIH TLV

Titanium Oxide

 

13463-67-7

*

     

Decabromodiphenyl Oxide

 

1163-19-5

*

     

Antimony Trioxide

 

1309-64-4

*

     

Zinc Oxide

 

1314-13-2

*

     

Carbon Black

 

1333-86-9

*

     

Silica, amorphous

 

7631-86-9

*

     

EPDM Polymer

 

25038-36-2

*

     
   

8042-47-5

*

     

* Proprietary

 

   

This material is a fully vulcanized rubber sheet which falls under the article exemption provided for under OSHA 1910.1200. There are no recognized hazards associated with normal use of this product.


SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS

Appearance/Odor:
Rubber-like odor, white/black sheet

Physical State:
Solid

Solubility in Water:
Insoluble

Boiling Point:
N/A

Specific Gravity (H2O=1):
1.24

Melting Point:
N/A

Vapor Pressure:
N/A

Vapor Density (Air=1):
N/A

Freezing Point:
N/A

Percent Volatiles:
N/A

Evaporation Rate:
N/A

Reactivity in Water:
N/A

pH (Full Strength):
N/A

pH (Recommended Dilution):
N/A

Refraction Index:
N/A


SECTION 4 - FIRE & EXPLOSION HAZARD DATA

Flash Point:
Above 260 C Open Cup

Flammable Limits (in air):
Not Established

Extinguishing Media:
Water fog followed by standard fire extinguishers-course stream.
Dry chemical and foam can also be used.

Fire Fighting Procedures:
Firefighters should wear full protective clothing including self-contained breathing apparatus to prevent inhalation of smoke and decomposition products. Toxic fumes and vapors may be involved.

Hazardous Decomposition Products:
Carbon Dioxide, Carbon Monoxide, Oxides of Nitrogen, Sulfur Dioxide, and partially burned Carbon.

Special Fire & Explosion Hazards:
Oil “bleeds” from material when burning.

Method Used:
Not Established

Auto-Ignition Temperature:
Unknown


SECTION 5 - HEALTH HAZARD DATA

Permissible Exposure Limit:
Not Established

Signs and Symptoms of Exposure:
Under normal conditions of use, this product will not release or otherwise result in exposure to hazardous chemicals. Sensitive individuals may exhibit eye, nose, throat or dermal irritation with prolonged exposure to processing fumes or vapors.

Effects of Overexposure:
Medical Conditions Aggravated by Exposure:
Toxic fumes may be released during fire. Exposure to fumes may aggravate pre-existing eye, lung, and skin conditions

Acute:
No known effects

Carcinogenicity:

IARC, NTP, and OSHA do not list this product as a carcinogen.

Chronic:
No known adverse effects

Emergency & First Aid Procedures:
Eye Contact:
Not Established

Skin Contact:
Physical form should preclude any harmful effect from contact.

Inhalation:
N/A

Ingestion:
Consult a Physician.

Primary Route of Entry:
Not Established


SECTION 6 - REACTIVITY DATA

Stability:
Stable

Incompatibility:
Not Established

Hazardous Decomposition Products:
Toxic gases or vapors, such as carbon monoxide, carbon dioxide, or oxides of nitrogen may be released during a fire.

Hazardous Polymerization:
Will not occur

Conditions to Avoid:
Open flames.

 


SECTION 7 - SPILL OR LEAK PROCEDURES

Steps to be taken in case material is released or spilled:
Small spill:
Scoop or shovel material into sealed containers.

Large Spill:
Same as small spill.

Waste Disposal Method:
Dispose of in accordance with local, state, and federal regulations.


SECTION 8 - SPECIAL PROTECTION

Respiratory Protection:
N/A

Eye Protection:
Safety glasses recommended.

Protective Gloves:
Gloves are recommended to prevent skin contact.

Other Protective Equipment:
None required under normal installation conditions.

Ventilation:
Store and use in well ventilated areas.

 


SECTION 9 - SPECIAL PRECAUTIONS OR OTHER COMMENTS

Storage/Handling:
Store in cool, dry, well ventilated facility.

Other Precautions:
Store material in original shipping packaging.

Work/Hygienic Practices:
Maintain good personal hygiene practices. Wash contaminated clothing before reuse. Do not eat, drink, or smoke in work areas. Wash exposed skin before eating, drinking, smoking, or applying cosmetics.


SECTION 10 - TRANSPORTATION

Regulatory Agency:
Not Regulated

Identification Number:
Not Applicable

Proper Shipping Name:
Not Applicable

Labels Required:
Not Applicable

Hazard Classification:
Not Applicable

Other Requirements:
Not Applicable


SECTION 11 – MISCELLANEOUS INFORMATION

Additional Comments:
This product is considered to be a finished article as per 29 CFR 1910.1200 © and is therefore exempt from the requirements of the Hazard Communication standard.

Date of Previous MSDS:
November 1992

Changes Since Previous MSDS:
Comment change in sections:  1 thru 9
Add sections: 10,11

Telephone Number for Additional Information:
(574) 293-9096


DISCLAIMER

The information contained herein is based on data considered accurate which has been obtained from other companies and organizations. However, no warranty or representation is expressed or implied that the information is accurate, complete, or representative. Water Tight Technologies, LLC. assumes no responsibility for injury to the buyer, the buyer’s employees, or any third persons if reasonable safety procedures are not followed.

White EPDM (Bi-Laminate)
March 28, 2007

 
 
Home About RUBBERALL Roofing Products Water Garden Products Contact Us About BRITE-N-EZ BRITE-N-EZ Roofing Products Roof Coatings Site Map